The DPA desk panel is a small, compact and userfriendly panel, which can be used for all kinds of
height adjustable desks from
heavy-duty workstations to standard
office desks.
The raised up and down buttons shaped as arrowheads make the panel very intuitive to use. The panel front is adjustable making it very flexible to be mounted in different ways thereby blending perfectly into any desk design.
2D drawing
3D models are available in the below formats:
- The desk does not drive at all
- The desk can only drive downwards
- The desk will not drive the full stroke upwards. Always stops in the same position
Check:
Is the mains connected to the control box?
Try/Solution:
Try to connect a lamp or similar to the mains supply to check that the supply voltage is OK.
Check:
Are all plugs mounted correctly in the control box and to the leg?
Try/Solution:
Check all connections.
Check:
Are there any visible damages on cables, controls, the control box or legs?
Try/Solution:
Damaged parts must be exchanged – contact the company where you bought your desk.
Back to top.
Back to top.
- The system has set a new end-stop outwards. To erase this position, the desk must be initialised again. Follow the procedure shown in the video: How to initialise your desk.
Back to top.
YouTube video - "How to initialise your desk":
The desk cannot drive up if it has not been initialised
If display: error code E01
How to initialise:
1. Press down key and drive to the lowest position.
Hold the key until the desk stops completely.
2. Reactivate the down key and hold the key until the desk stops completely.
Now the desk can drive up.
- Download above video: How to initialise your desk (16Mb .wmv-file)
Back to top.
For further information please see the
DESKLINE User Manuals.