DPG with reminder

To initialise the desk, drive downwards, press and hold the tilt until movement has been performed.

To adjust the desk, tilt the panel down for driving downwards and up for driving upwards.

To initialise the desk, drive downwards, press and hold the tilt until movement has been performed.

To adjust the desk, tilt the panel down for driving downwards and up for driving upwards.

Please accept marketing cookies to watch this video.

Press the Bluetooth^® button for two seconds. The light strip starts to blink with a blue colour. The display shows the ID of the desk.

Open your downloaded app and connect to the desk. Look for the correct ID in the list of “Desks nearby”. 

Follow the onboarding instructions in the app.

Please accept marketing cookies to watch this video.

The DPG with display has four memory positions in total. 

Drive to the required desk height and then toggle the “star” button until the display shows either “star 3” or “star 4”. Release button. 

To store a position press the “star” button for two seconds. White light flashes and becomes static when the positon is saved.

To reset all memory positions press and hold the “star” button for eight seconds, until the light flashes red.

Please accept marketing cookies to watch this video.

To store a memory position drive to the required position.
Press the “star” button for two seconds. 
White light flashes and becomes static when position is saved.

Tilt and hold, to drive to a memory position.

If the DPG features automatic drive, tap twice on the DPG in the direction you want to drive. The DPG stops at the first stored position in the chosen direction. 

Please accept marketing cookies to watch this video.

The light strip reminds you when it is time to stand up. 
Green = ok 
Orange = it is time to stand up

Default setting is 55 minutes sitting. 
Press the “bell” button to see the interval.
 
How to change interval or choose “OFF”. 

Change your interval by toggling between the four settings.

Interval 1: Reminder after 55 minutes sitting

Interval 2: Reminder after 50 minutes sitting

Interval 3: Reminder after 45 minutes sitting

Interval 4: OFF disable the function

How to reset the light strip reminder.

To reset the light strip reminder press and hold the “bell” button for eight seconds until the light flashes red. 

Please accept marketing cookies to watch this video.

There are three reset possibilities:

• Reset of memory positions
• Reset of light strip reminder
• Factory reset

To reset all memory positions, press and hold the “star” button for eight seconds until the light flashes red.

To reset the light strip reminder, press and hold the “bell” button for eight seconds until the light flashes red.

Factory settings: 
To return to factory settings press and hold the “bell” button and the “star” button for eight seconds until the light flashes red.

Please accept marketing cookies to watch this video.

Set correct desk height: 
If the height shown in the display is not the actual height of the desk, it can be corrected.

Measure the height of the desk from floor to tabletop. Press the “bell” button and the Bluetooth^®  button for five seconds. When the display starts to blink, tilt the panel upwards if the number is too low or downwards if the number is too high.  

Change between cm and inch:
Change between cm and inch by pressing the “star” button and the Bluetooth^® button for five seconds. When the display starts to blink, tilt the panel up or down and the unit changes.

Please accept marketing cookies to watch this video.

Possible problem: Mains not connected to the control box
Try/Solution: Try to connect a lamp or similar to the mains supply to check whether there is adequate supply voltage. 

Possible problem: Are plugs mounted correctly in the control box or to the leg?
Try/Solution: Check all connections. 

Possible problem: Are there any visible damages on cables, controls, the control box or legs?
Try/Solution: Damaged parts must be exchanged. Contact the company that sold you the desk.